Dry Products



Microna™ 2

Microna™ 2 is a dry, extra fine, double classified natural calcium carbonate filler / extender designed specifically for use into paints, plastics, and mastic systems. In paint formulations, it contributes to titanium dioxide spacing for hiding and exterior durability. Microna™ 2 is also recommended for use in rubber, reinforced polyester, and plastisol compounds.

Typical applications include:


Other
Adhesives

Plastics
Plasticized PVC profiles, moldings and coatings

Paints
Industrial paints, brushing enamels, stoving enamels, powder coatings, and water-thinable lacquers


Microna™ 3

Microna™ 3 is a fine, dry, natural calcium carbonate filler / extender specifically designed for use in all types of coatings and paints. It provides consistent high fineness of grind readings and good gloss development. Microna™ 3 is effective as a value adding extender in rigid and plasticized PVC. Microna™ 3 is used at high levels in putties, caulks, and sealants because of its nominal oil absorption.

Typical applications include:


Paints
Synthetic resin paints, emulsion paints, industrial paints, and primers

Plastics
PVC pipe and conduit, plasticized PVC profiles, injection moldings, coatings

Polyolefins
Compound/master batch for moldings and films

Thermosets
EP/UP molding compounds, GRP PUR-foam

Other
Dry wall cements, textured finishes, caulks and sealants


Microna™ 7

Microna™ 7 is a dry filler / extender pigment specifically designed for use in various rubber and plastic applications such as adhesives, putties, caulks and glazes. Microna™ 7 is a relatively low cost fine product that minimizes the problems associated with oversize grit and offers excellent economic performance. In paint formulations, Microna™ 7 contributes to excellent flow leveling and exterior durability. It can be used whenever a white fine particle size, low binder demand filler is required.

Typical applications include:


Paints
Emulsion paints, Primers, Traffic paint

Plastics
Thermosets; EP/UP molding compounds, GRP

Elastomers
Adhesives, Ceramics

Other
Textured finishes, caulks, sealants


Microna™ 10

Microna™ 10 is a filler/extender pigment designed for use in paints, plastics, and mastic systems. Its low oil absorption makes it attractive for use with costly vehicles. In paint formulations, Microna™ 10 contributes to excellent flow leveling and exterior durability.

Typical applications include:


Paints
Emulsion paints, Matte paints, Traffic paints

Wall Finishes
Emulsion based wall finishes, Textured coatings, EIFS

Plastics
PVC plasticols, Floor/wall coverings

Thermosets
EP/UP molding compounds, GRP

Other
Caulks, sealants, adhesives, household cleaners


Microna™ BP 200

Microna™ BP 200 is a de-dusted filler/extender pigment designed specifically for building products. These products have several filler requirements as a common bond: brightness, low binder demand, uniformity, and suitable particle size distribution to accomplish excellent compactness and shelf life stability. It is specially formulated with the ultra fines removed to improve the performance of end products.

Typical applications include:


Construction
Dry wall cements, joint compounds, caulks, sealants

Other
Textured paints


Micronatex™ Texturing Sands (Calcite Sands)

Micronatex™ sands are ground limestone sands designed specifically for use in architectural products, as a filler for cultured marble, and in textured paints.

All of these end use areas have several filler requirements as a common bond: brightness, low binder demand, uniformity, and suitable particle size distribution.

QUESTIONS?

If you have any questions about CRC’s Dry Product lines please contact us via the “Contact Us” tab to access CRC’s questionnaire form.  One of our sales representatives will respond within 48 Hours of your enquiry.   Product data sheets and MSDSs are also available via the “Contact Us” tab.

 

Comments are closed.